SSV housing/gear/screw/cover design change notes updated 8/17/17 (Revised schematics fully notated 3/29/24)

SSV housing/gear/screw/cover design change notes updated to be a little clearer on the sizing problem. See the page in our support site:

https://scottsbt.zendesk.com/hc/en-us/articles/205156895
We used to have this page laid out with info for each model but it was too confusing, so the schematic pdfs have been revised for each reel to make that reel models notes clearer. There are links below to each model's part section and it's revised schematic. Schematics are also in each reels parts section near the top.

So all of the updated schematics are now linked in the above design change page, as well as in the reel parts sections for each model.

Fathom Lever Drag LD 2 Speed updates

Fathom Lever Drag LD 2 Speed updates

Rev0 schematics edited for changes in Rev1 or Rev3 depending on the model.

FTH15XNLD2 and FTH15XNLD2LH schematic and parts have been added to the system.

Notes about error corrections and/or design changes added to schematics where applicable.

https://www.mysticparts.com/PennParts/Conventional.aspx#FathomLeverDrag2Speed

Penn Fathom Lever Drag 2-Speed Reels
FTH15LD2 Fathom Lever Drag 2-Speed
FTH15XNLD2 Fathom Lever Drag 2-Speed
FTH15XNLD2LH Fathom Lever Drag 2-Speed
FTH25NLD2 Fathom Lever Drag 2-Speed
FTH25NLD2-LH Fathom Left Hand Lever Drag 2-Speed (Left Hand)
FTH30LD2 Fathom Lever Drag 2-Speed
FTH30LD2-LH Fathom Left Hand Lever Drag 2-Speed (Left Hand)
FTH40NLD2 Fathom Lever Drag 2-Speed
FTH60LD2 Fathom Lever Drag 2-Speed

I will soon be updating the reel specs page for these reels as well. https://www.mysticparts.com/PennParts/ReelSpecs/PennFathomLever2-Speed.aspx#specs

First Year Manf.: 2014
REEL INFO: The PENN Fathom lever drag 2-speed series of reels are compact but loaded with big features. Featuring a Full Metal Body, stainless steel main and pinion gear, Dura-Drag washers, and a double dog ratchet anti- reverse you will find there is no stopping these reels. (2014 Advertising)

HISTORY:
Name/Series: Fathom, Fathom Lever Drag 2-Speed

Construction:

Full metal body and sideplates
Forged and machined aluminum spool
Stainless steel main and pinion gear
Dura-Drag washers virtually eliminate hesitation, even under extreme drag settings
Line Capacity Rings
Quick-Shift 2-speed system
Double-dog ratchet anti-reverse
5 shielded stainless steel ball bearings

I will also be adding the image files for the reels.

Images are a work in progress atm

 Hi all

December 2022 and I've finally deleted ALL of the catalog product images from their old location on the scottsbt.com site.

I'd already moved the files from there to mysticparts.com

I've already edited a ton of image file links over to mysticparts.com

But deleting the old scottsbt files means you'll see a lot of those little icons that show an image link is there but you can't view the file because it's moved.

I am in the process of working my way through and changing over all of the links.

If there isn't an little icon or it's blank, that part doesn't HAVE any photo yet. That is also a long term work in progress, but you can use the contact us link at the bottom of the MysticParts.com website to request a photo be taken if the item is in stock, if you absolutely must see an image first.

Please be patient as always. 

Thanks! ~Mo

Slammer IV Spinning Reels, Specs, Parts and Schematics online

Penn's Slammer IV series is completely set up in our site as of 9/24/22

I've finished re-revising our MRP versions of the schematics with errors/changes by Penn and our added notes for each reel. Corrected some of my own errors from the first upload as well.

Slammer IV specs page with links to parts sections, schematics and owners manual (Penn's generic spinning reel manual):

https://www.mysticparts.com/PennParts/ReelSpecs/PennSlammerIV.aspx#specs

Slammer IV Reel section:

https://www.mysticparts.com/Fishing/Reels/Penn/SlammerIV_Spinning.aspx

NOTE:

Slammer IV DX is being done as a separate grouping so that's next for our MRP version of schematics etc.

Parts for the DX are already online

 https://www.mysticparts.com/PennParts/Spinning.aspx#SlammerIVDX

~Mo, Parts & Tech Support

SQUALL ii Star Drags fully online

SQUALL ii Star Drags fully online

Squall II Star Drag series parts sections
With the MRP version of schematics uploaded this week 8/10/22
https://www.mysticparts.com/PennParts/Conventional.aspx#SqualliiStarDrag

Reel Specs page
https://www.mysticparts.com/PennParts/ReelSpecs/PennSqualliiStarDrag.aspx

Reels online to order
(by special order if Penn has them, not currently in stock here)
https://www.mysticparts.com/Fishing/Reels/Penn/SqualliiStarDrag.aspx

~Mo, Parts & Tech Support

SCHEMATIC REVISIONS: Penn General Purpose Levelwind 9, 9LH, 109, 109LH, 209, 209LH, 209LC and 309

SCHEMATIC REVISIONS: Penn General Purpose Levelwind 9, 9LH, 109, 109LH, 209, 209LH, 209LC and 309  1

 Currently revising from Penn's most recent schematic revisions

Adding all the design change notes etc.to our MRP schematic pdf files

https://www.mysticparts.com/PennParts/Conventional.aspx#GPLevelwind

UPDATED   9, 9M, 9F, 9S, 9MF, 9MS Peerless Monofil

UPDATED   9-LH, 9M-LH Peerless Monofil (Left Hand)

UPDATED   109, 109M, 109F, 109S, 109MF, 109MS Peer Monofil

UPDATED   109-LH, 109M-LH Peer Monofil (Left Hand)

UPDATED   209, 209M Peer Monofil Sr.

UPDATED    209-LH, 209M-LH Peer Monofil Sr. (Left Hand)

UPDATED   209LC Line Counter Peer Monofil Sr.

UPDATED   309M Super Peer

MAIN AND PINION GEAR DESIGN CHANGES!

One of the big changes over time for these was in the 209LC gearing (RATIO 3.2:1) being backwards compatible. As Conversion Kit for: 25, 26, 27, 155L, 160L, 180, 209M (Original gearing was (RATIO 3:01) 

LH 155-LH and 209M-LH reels, teeth counts updated (with the parts links like in the conversions) on all gear notes in descriptions https://www.mysticparts.com/PennParts/Parts/5-155LH.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/13-155LH.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/5-209LC-LH.aspx (RATIO 3.2:1) https://www.mysticparts.com/PennParts/Parts/13-209LC-LH.aspx (RATIO 3.2:1) 

LH 155-LH and 209M-LH reels teeth counts updated in the conversion info

https://www.mysticparts.com/155LConvertingLH.aspx

https://www.mysticparts.com/PennParts/Parts/209M-Convert-Left-Hand.aspx 

Regular RH reels, gear notes added with linked parts to regular gearing https://www.mysticparts.com/PennParts/Parts/5-155.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/13-155.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/5-209LC.aspx (RATIO 3.2:1) https://www.mysticparts.com/PennParts/Parts/13-209LC.aspx (RATIO 3.2:1)

and kit for the 209LC gearing

https://www.mysticparts.com/PennParts/Parts/5C-209.aspx

So I fleshed out the notes on our schematics and online so it's basically everywhere it would need to be to be seen.

Schematics: Slammer III, SLAiii Spinning Reels - Revisions Done to .pdfs

 https://www.mysticparts.com/PennParts/Spinning.aspx#SlammerIII

10/8/22 corrections to the SLA550, SLA6500, SLA6500HS MRP versions of schematics for part key #22a, see schematics. Also reformatted the layouts for clarity on all the pdf files. ~Mo

11/2019  Updated from Penn's most recent schematic revisions

MRP versions will reflect design changes, corrections and known problems.

There's a big set of changes in these because they changed the entire bail system after a couple of early runs. ~Mo